APPLICATION

Industrial shock absorbers (also called industrial dampers) are widely used in automation and machinery to absorb kinetic energy, reduce impact force, and protect equipment. Here is the main application:

• Automation & Robotics(robot arms,pick-and-place machines,linear slides,gantry systems)
• Packaging & bottling machines  *Material Handling Systems
• Machine Tools  *Circuit breaker mechanism protection system
• Magnet crane for steel lifting
• Prosthetic leg ,other medical devices & lab automation
• Industry washing machine and printing machine
• Kitchen equipment  *Racing simulation motion control  *Turnstile
• Heavy Machinery & Industrial Equipment
• Automotive & Transportation Industry
• High-speed rail door, Gates, Swimming pool hinges and Safety Systems

A microduct connector is a precision coupling fitting that joins two microduct tubes in an air-blown fiber (ABF) system.This is a telecom infrastructure engineering application. 

• Underground Duct Networks
• Building Internal Cabling
• Road / Railway Communication Systems

A hydraulic speed controller is a self-contained hydraulic damper that controls the speed of moving machine parts. It is often called:

• Hydraulic speed regulator
• Industrial motion control damper
• Hydraulic shock absorber with constant speed control
• Hydraulic check or hydro-check
• Unlike shock absorbers (which stop motion), hydraulic speed controller controls motion speed smoothly over the stroke.

Typical application:

• Automation & assembly lines: stops load moving on conveyor, then allows load to continue after the plunger is depressed
• Lathe & Drilling machine cushion-start, controls feed rate of slide operated by an air cylinder.
• Racing simulation braking system with the soft brake

A pneumatic pressure indicator is a device used to display or signal the air pressure in a pneumatic system so operators and control systems can monitor safe and correct operation.

A cylinder sensor is typically used to detect the position of a piston inside a pneumatic or hydraulic cylinder. These sensors help automate and control industrial processes by providing feedback about cylinder movement.

Pneumatic vibrator (air hammer) uses compressed air to create vibration or repeated impact force. It's widely used in industrial environments where electric vibration isn't ideal (dusty, explosive, or wet areas).
Main Applications of Pneumatic Vibrator / Air Hammer:

• Construction Industry(Concrete compaction - removing air bubbles, Loosening stuck materials,Breaking small concrete sections - air hammer type)
• Bulk Material Handling Eg. The Hoppers
• Powder Industry(medical powder,flour,cement,chemical etc.)
• Mining & Quarry
• Automotive & Manufacturing
• Agriculture & Food Industry
• Foundry Applications

We can supply ball vibrators,roller vibrators,turbine vibrators,piston vibrators,pulse air hammer etc.The material can be aluminum and stainless steel.

The vacuum spray valve (liquid sprayer) is used to atomize and precisely apply liquids such as water, chemicals, oils, adhesives, coatings, or cleaning agents. It ensures controlled, uniform, and efficient liquid distribution.

Fast testing tool also named as fast leak test connector or fast testing valve.The products are engineered to deliver fast, reliable, and leak-tight connections for virtually any port, tube, thread, or hose. These quick-connect tools allow one-hand operation, eliminating the need for wrenches, thread tape, or sealants, so you can reduce setup time and increase throughput. Fast, repeatable leak-tight connections, so you can quickly connect and disconnect from threaded ports while maintaining a leak-tight seal, particularly for pressure and vacuum leak testing.
These tools are not electrical connectors — they're air pressure test connectors used in industrial, automotive, aerospace, and general manufacturing environments for:

• Leak testing of components (e.g., pneumatic cylinder, valves, fittings, housings)
• Pressure testing systems
• Filling or evacuation operations during testing
• High-volume production test setups

The filling valve is used to control the filling of liquids or gases into a tank, container, or system. It ensures accurate, safe, and automatic filling.

In plastic blow molding (including PET bottle blowing), pneumatic components are critical for controlling motion and air flow at precise times during the process. These machines rely on compressed air to open/close molds,move preforms and stretch rods, deliver high-pressure blowing air to shape the plastic.Pneumatic cylinders actuate the mold halves to clamp/pre-clamp before blowing and open after forming.Stretch rods extend into the preform before blowing to stretch the plastic and then retract. Pneumatic stretch cylinders perform this action.Pneumatic valves control where and when air is sent to those cylinders and to the blow-air circuits. At plastic blowing machine there also have other pneumatic components include shock absorber,linear cylinder,pneumatic gripper,2/2 way solenoid valve,air regulator,air units,quick exhaust valve,silencer and pneumatic fittings.

Pneumatic gripper uses compressed air to open and close jaws for holding, picking, or positioning parts in automated systems. It is widely used in industrial automation due to its speed, simplicity, and reliability.

• Pick-and-place operations  /  Assembly line part handling
• Machine loading & unloading  /  Sorting and packaging
• Handling metal components  /  Transferring machined parts
• Holding parts during welding  /  Loading/unloading CNC machines
• Carton handling  /  Bottle gripping  /  Food tray handling
• Palletizing & depalletizing  /  Removing bottles from molds
• Transferring plastic parts  
• Handling preforms in PET blowing machines
• PCB handling  /  Small component placement
• Delicate part gripping (with soft jaws)  /  Hygienic product handling
• Blister pack loading  /  Sorting products on conveyor lines

A vacuum suction cup uses negative pressure (vacuum) to grip and move objects. It is widely used in automated assembly lines where fast, smooth, and damage-free handling is required.
Common Application:

• Picking plastic parts from conveyor
• Transferring components between stations
• Loading/unloading machines
• Removing bottles from blow molding machines  /  Handling plastic caps
• Picking thin plastic sheets or labels  /  Carton box handling
• Picking sachets or pouches  /  Placing products into trays
• Palletizing and depalletizing  /  PCB handling
• Picking delicate components  /  Glass screen handling
• Handling body panels  /  Moving glass windshields
• Transferring metal sheets  /  Handling sealed food packs
• Picking biscuits or chocolate trays  /  Vacuum transfer of flexible packaging

Currently we can supply flat suction cup,bellows suction cup,deep suction cup foam suction cup and magnet non-touch pad.

Pneumatic grippers are widely used in plastic bottle cap assembly lines.
They are actually one of the most common handling solutions in cap manufacturing and capping systems.

• Pick caps from vibratory bowl feeder
• Transfer caps to conveyor or indexing table
• Hold caps during orientation process
• Pick liner material
• Place liner inside cap
• Hold cap during pressing operation
• Pick cap from chute
• Place onto bottle neck
• Position cap before tightening
• Remove defective caps
• Transfer rejected caps to scrap bin

Vacuum ejector (vacuum generator) uses compressed air to create vacuum through the Venturi principle. It is compact, fast, and widely used in industrial automation where electric vacuum pumps are not practical.

• Pick & Place Automation
• Packaging Industry
• Plastic & Blow Molding
• CNC & Metalworking
• Electronics Industry
• Printing & Paper Industry
• Medical & Laboratory

 #2307, No.345 South of Huancheng West Road, Haishu, Ningbo, 315012, Zhejiang, China